Automat za paralelno EPP zavarivanje žicom prečnika 2 x 2.5 mm – uronjeno lučno zavarivanje – tip KA 7-UPP

KA-7-UPPWelding Automat SAW-parallel wire welding
Wire diameter up to 2 x 2,5 mm KA 7-UPP

Zavarivački automat za uronjeno lučno zavarivanje (EPP/ SAW) paralelnim žicama do 2x 2.5mm, na ravnim komadima ili po šinama vodilicama kao i za unutrašnje zavarivanje cevi.

Welding automat for SAW-parallel wire welding with wires up to 2 x 2.5 mm, on plane plates or on guiding rails and for  inside welding of tubes as well.

  • Mobilan, samo – pogonjeni automat za zavarivanje/ Mobile,
  • self-propelled welding automat,
  • Flexible application because of modular principle
  • Pred-podešene kontrole za zavarivačku struju, voltažu luka i brzinu hoda / Pre-set controls for welding current,arc voltage and travel speed
  • Odvojeno podešavanje parametara za start i ispun rupa / Start and crater filler parameters separate to adjust
  • Start i stop kolo za optimizaciju zavarivačkog procesa / Start and stop
  • circuit for optimising the welding process.
  • Traktor se kreće direktno po radnom komadu ili po šinama / Tractor runs directly on the workpiece or on rails.
  • Precizno podešavanje žice- šavu obezbeđuje optimalnu geometriju zavarivačkog šava / Precise wire-to-seam adjustment ensures optimal geometry of the welding seam
  • Unutrašnje zavarivanje cevi i bojlera sa min. 1.500 mm prečnikom / Inside welding of tubes and boilers with min. 1,500 mm diameter.
  • Lako prilagođavanje drugim zavarivačkim tehnikama / Easy adaptation to other welding technologies.
  • Tahometrijskim generatorom kontrolisan traktor sa pogonom na svim točkovima; prečnik točkova 160 mm / Tachgenerator controlled tractor with all-wheel drive; 160mm diameter wheels
  • Robusna oprema dodavača žice za žice 2 x 1.6mm do 2 x 2.5 mm, sa pogonom na 2 točkića za lagani prenos obe žice/  Sturdy wire feed gear for wires 2 x 1.6 mm up to 2 x 2.5 mm, with 2-roll drive for smooth transportation of both the wires
  • Pogodno za maksimalno 1.200 A zavarivačke struje / Suitable for max. 1,200 A welding current
  • Ručno podešavanje glave maksimalno 100mm u horizontalnom i vertikalnom pravcu / Manual head adjustment of max. 100 mm in horizontal and vertical direction.
  • Odvojene kontrole po nivoima :aktivni elementi u prvom novou kontrolne table (podešavanje zav.struje, voltaže luka i brzina hoda) a u drugom nivou su pasivni elementi dostupni operatoru nakon otvaranja pokrivne ploče. / Active control parameters arranged in the first service level of the control board (welding current, arc voltage, travel speed); passive elements in a second service level, accessible to operator after opening the cover plate
  • Podesivi točkovi dodavača za sprovođenje traktora po konstrukcionim delovima, mrežnim komadima, profilima, itd/ Adjustable guide rollers for conducting the tractor along construction members, web plates, profiles, etc.

Tehnologija/ Technology                       SAW-parallel wire welding
Zavarivačka struja / Welding current (A) max. 1400
Kontrolna voltaža/ Control voltage (V/Hz) 42 AC / 50
Prečnik žice/ Wire diameter                    (mm) 2 x 1,6 do2 x 2,5
Brzina dodavača žice / Wire feed speed (m/min) 2.5 – 5.0
Brzina hoda / Travel speed (m/min) 0.1 – 6.1
Podešavanje ukršteno/ visina / Cross / height adjustment (mm) 0.1 – 2.0
Raspon obrtanja kolone/ Column swivel range (°) 100 / 100
Obrtni ugao glave gorionika / Swivel angle torch headWelding head inclination (°) 45 (na obe strane / on both sides)
Prečnik cevi pri unutrašnjem zavarivanju/ Tube diameter for inside welding (mm) 1,500
Težina automata / Weight automat (kg) 61
Maksimalna težina kalema žice/ Weight t wire reel max. (kg) 2 x 25
Dimenzije automata D x Š x V / Dimensions automat   L x W x H (mm) » 1,050 x 600 x » 900

Ostavite komentar

 
EWM  Hightec Welding Merkle Kjellberg Finsterwalde Hypertherm MGM TBI Industries Kemper IGM Group Polysoude Elektroda Zagreb RAM Rijeka
Visit Us On FacebookVisit Us On TwitterVisit Us On Google PlusVisit Us On YoutubeCheck Our Feed